PARS MASHAL is one of the leading burner producers in the Middle East, with more than 12 years of research and development to give our end users one of the most trouble free burners on the market today. PARS MASHAL produces burners in a range from 12kW up to 47.44 MW in approximately 100 different models, in light oil, natural gas, heavy oil, and dual fuel burners. The above mentioned can again be split up into four main groups:
Group 1- 12 kW up to 783 kW burners for domestic use (compact burner)
Group 2- 356 kW up to 3000 kW mono-block burners for commercial and small industries.
Group 3- 6000 kW up to 15,600 kW burners.
Group 4- OUR NEW PRODUCTION:

3.5 MW up to 47.44 MW Rotary Cup Burners
We would like to take this opportunity to bring to your attention a few of the salient features of our burners.

Group 1-
As previously mentioned these burners are mainly used for central heating in the domestic field, to give our end users one of the most energy saving burners in the market today. Along with the fact that these burners are very economic to run, they have a low noise level, almost 11pct lower than some of the competitors models in the same range. All the components are positioned in such a manner that service time is brought down to a minimum. Unlike some of the burners, heat sensitive components are mounted far away from the boiler as possible thus giving the component a lower ambient temperature which in turn adds to the longer life of the component.

Group 2-
These monoblock burners have been designed using the most up to date gas burner technology along with the new perceptions in the field of oil burner constructions to give our users a burner suitable for both conventionally pressurized or non pressurized combustion chambers.
By careful design selection of the combustion air fans all the burners have been made compatible with modern high resistance boilers. The correct fan characteristics ensures a smooth stable starting, a minimum of combustion noise, and a greater reliability.
Safety for all PARS MASHAL burners is spelled with capital letters. All the controls and burner components used, far exceed the standards and requirements put down for burners in the field of heating.
The monoblock burners have been completely constructed keeping the burner engineer in mind. All the components are clearly arranged and readily accessible to the service engineer. All the burners are designed in such a way that either burner body can be made to swing aside to give access to the combustion head or the entire combustion head is made a available to the engineer, by removing the top cover.